| Working principle: | Water ring, single-stage |
| Pump body material: | Cast iron, stainless steel |
| Pumping capacity: | 1.35 - 110 m3/min |
| Ultimate vacuum pressure: | -0.094Mpa |
| Water consumption amount: | 10 - 340L/min |
| Caliber: | 70 - 200mm |
| Motor speed: | 1410 - 490rpm |
| Seal: | Mechanical seal, packing seal |
| Motor power: | 3 - 185KW |
| Compressor power: | 4 - 280KW |
| Motor specification: | 220/240/380/400/415/440v, 3phase, 50/60Hz, etc |
| Main application | Air, etc |
| Customized service: | Vacuum tank, filter, etc |
| Model | Pumping capacity (m3/min) |
Ultimate vacuum pressure (MPa) |
Motor power (KW) |
Speed (r/min) |
Compressor pressure (MPa) |
Caliber(mm) |
Water consumption (L/min) |
|||
| Max. |
When the scution pressure is - 0.06MPa |
Vacuum pump |
Compressor | Inlet | Outlet | |||||
| SK-1.5 | 1.5 | 1.35 | -0.091 | 3 | 4 | 1450 | 0-0.1 | 70 | 70 | 10-15 |
| SK-3 | 3 | 2.8 | -0.094 | 5.5 | 7.5 | 1450 | 0-0.1 | 70 | 70 | 15-20 |
| SK-6 | 6 | 5.4 | -0.094 | 11 | 15 | 1450 | 0-0.1 | 80 | 80 | 20-30 |
| SK-9 | 9 | 8.1 | -0.094 | 15 | 22 | 1450 | 0-0.1 | 80 | 80 | 30-40 |
| SK-12 | 12 | 11 | -0.094 | 18.5 | 30 | 970 | 0-0.1 | 80 | 80 | 40-50 |
| SK-15 | 15 | 13.5 | -0.094 | 30 | 37 | 970 | 0-0.1 | 80 | 80 | 50-60 |
| SK-20 | 20 | 18 | -0.094 | 37 | 55 | 730 | 0-0.1 | 150 | 150 | 60-80 |
| SK-20B | 20 | 18 | -0.094 | 30 | 45 | 730 | 0-0.1 | 150 | 150 | 60-80 |
| SK-30 | 30 | 27 | -0.094 | 55 | 75 | 730 | 0-0.1 | 150 | 150 | 70-100 |
| SK-30B | 30 | 27 | -0.094 | 45 | 55 | 730 | 0-0.1 | 150 | 150 | 70-100 |
| SK-42 | 42 | 37.2 | -0.094 | 75 | 90 | 730 | 0-0.1 | 150 | 150 | 95-130 |
| SK-42B | 42 | 37.2 | -0.094 | 55 | 75 | 730 | 0-0.1 | 150 | 150 | 95-130 |
| SK-60 | 60 | 54 | -0.094 | 90 | 132 | 550 | - | 250 | 250 | 200-220 |
| SK-85 | 85 | 76.5 | -0.094 | 132 | 185 | 550 | - | 250 | 250 | 250-280 |
| SK-120 | 120 | 110 | -0.094 | 185 | 280 | 490 | - | 300 | 250 | 300-340 |