• TEL: 0086-577-67926980
  • Mobile: 0086-13626550065
  • Whatsapp: +8613626550065
  • E-MAIL: ron@rondapump.com

RFY pneumatic slurry slurry pump

RFY Pneumatic slurry pump is driven by compressed air from air compressor. There’s air plunger makes reciprocating motion to driven open and off of guiding plunger, so as to transfer fluid. By adjusting the air strength, the flowrate of fluid is adjustable. Also it may equip with air sensor element to make automatic system.


Working principle: Pneumatic, plunger
Pump body and wet parts material: Stainless steel 304
Max. medium temperature: 100℃
Max. viscosity: 120000cst
Flow rate: 0.8 - 5m3/h
Head: 0 - 100m
Tube diameter: 51 - 72mm
Outlet diameter: 32 - 50mm
Outlet connection type: Hose
Gas port diameter: 3/8inch
Seal: Rubber seal
Max. supply pressure: 10kgf/cm2
Air consumption: 0.3 - 1.0m3/h
Main application: Slurry, chemical, oil, water, etc
Customized service: Tube length, seal material


Model RFY0.8T-1 RFY1.2T-1 RFY1.2T-2 RFY3.2T-1 RFY3.2T-2 RFY5.0T
Inlet and outlet of outer diameter(mm) 51/32 60/32 55/32 72/38 55/32 88/50
Capacity(m3/h) 0.8 1.2 1.2 3.2 3.2 5.0
Head(m) 0-100 0-100 0-100 0-100 0-100 0-100
Max. grain diameter(mm) Φ0.8 Φ1.2 Φ1.2 Φ3 Φ1.2 Φ5
Max. supply pressure(kgf/cm2) 10 10 10 10 10 10
Pressure(MPa/min) 0.3-1.0 0.3-1.0 0.3-1.0 0.3-1.0 0.3-1.0 0.3-1.0
Max. viscosity(c.s.t) 120000 120000 120000 120000 120000 120000
Outlet diameter (Inch) 1 1/4" 1 1/4" 1 1/4" 1 1/2" 1 1/4" 2"
Gas supply port diameter(Inch) 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"
Outlet pressure(MPa) 0-1.0 0-1.0 0-1.0 0-1.0 0-1.0 0-1.0
Cylinder pressure ratio 2:1 2:1 2:1 3:1 4:1 3:1
Air consumption(m3/min) 0.3-1.0 0.3-1.0 0.3-1.0 0.3-1.0 0.3-1.0 0.3-1.0
Volume(cm3) 143×19×18 152×19×18 147×19×18 166×21×18 158×21×18 172×23×21
Weight(kg) 14 16 15 23 19 37
Specification(mm) 100×1380 100×1450 100×1400 120×1600 120×1500 150×1680
 
客服中心

Ron

Jack

Dora

展开客服